A vessel fired at a relatively low temperature remains porous and would seep water unless it is sealed. Which clay body behaves this way?

A dense, hard, opaque mug was fired above about 1200 °C and does not absorb liquid. Which clay body is it?

When held to a strong light, a thin white cup lets some light pass through its wall. Which clay body makes that translucency possible?

A potter wants a red-brown flowerpot that can be fired at a relatively low temperature. Which clay body is the best choice?

A potter needs an opaque, high-fired dinner plate that is hard and resistant to liquid even without glaze. Which body fits?

What is the heated chamber that permanently hardens shaped clay during firing?

A potter uses a thin clay-and-water mixture to attach a handle to a leather-hard cup. What is the mixture called?

After decorating a bisque-fired bowl, an artist applies a coating that melts into a glassy surface during firing. What is that coating?

A potter centers wet clay on a spinning wheel and pulls it upward into a symmetrical vase. Which forming process is being used?

An artist rolls clay into even flat sheets, cuts panels, and joins the panels into a box. Which construction method is this?

A bowl has a dark slip layer scratched away to reveal the lighter clay beneath as a line design. Which surface technique produced the design?

A glassworker winds hot glass around a removable clay-and-sand form to make a small perfume container. Which method is this?

A maker inflates molten glass through a hollow tube, allowing bottles to be formed quickly. Which technique is being used?

In a stained-glass window, colored pieces are held in H-shaped strips that are soldered together. What are those strips called?

A craftsperson paints details onto colored window glass with powdered glass pigment, then fires the panel so the details bond permanently. What material was applied?

On a loom, which threads are stretched lengthwise under tension before weaving begins?

A weaver passes one thread side to side, over and under the stretched threads on a loom. What is the moving thread called?

A fabric alternates over one thread and under one thread in a regular checkerboard pattern. What weave structure is this?

A close look at a fabric reveals repeated diagonal ribs created by offset interlacing. Which weave structure is visible?

An artist draws with hot wax on cloth before dyeing it, and the waxed areas resist the dye. Which resist-dye process is this?

A silversmith repeatedly hammers a flat disk upward around a stake until it becomes a deep bowl. Which metalworking process forms the vessel?

A metalworker hammers the reverse of a copper sheet so a lion projects outward in low relief. Which technique creates the raised image?

After a relief is pushed out from the back of a metal sheet, an artisan works on the front to sharpen lines and recess details. What is this finishing process?

Thin metal wires are soldered into small compartments, then the cells are filled with colored glass paste and fired. Which enameling technique is shown?

An artisan cuts shallow grooves directly into a metal plaque, fills the recesses with enamel, and fires it. Which enameling technique is this?